Available project(s) in   Mechanical / Metallurgy / Remote handling / Mechatronics.

Sr. No.
Discipline
Project Duration
Title
(Click on Title to see the Abstract)
Project Status
Date of Upload
IPR/ME/2024/05/210/37
Mechanical Engineering
16 Weeks
Open
24-May-2024
IPR/ME/2024/04/201/34
Mechanical Engineering
6 Weeks
Study of heat transfer in tubes
Closed
8-Apr-2024
IPR/ME/2024/03/197/31
Mechanical Engineering
12 Weeks
Open
1-Apr-2024
IPR/ME/2024/03/198/31
Mechanical Engineering
12 Weeks
Open
1-Apr-2024
IPR/ME/2024/03/199/33
Mechanical Engineering
12 Weeks
Cool down analysis of 80K Cryopump
Closed
1-Apr-2024
IPR/ME/2024/03/189/29
Mechanical Engineering
12 Weeks
Open
1-Apr-2024
IPR/ME/2024/03/200/33
Mechanical Engineering
12 Weeks
Hazard and Operability Analysis (HAZOP) for 80K Cryo pump of LIGO India Vacuum Integrated System Test Assembly (LI_VISTA))
Closed
1-Apr-2024
IPR/ME/2024/01/182/26
Mechanical Engineering
12 Weeks
Design Study of Vacuum Chamber for NF3 Gas based Glow Plasma Discharge System
Closed
25-Jan-2024
IPR/ME/2023/11/157/23
Mechanical Engineering
12 Weeks
Design and analysis of the convergent & convergent divergent nozzle for supersonic flow
Closed
28-Nov-2023
IPR/ME/2023/06/132/22
Mechanical Engineering
40 Weeks
Development Of Heat Switch For Low-Temperature Application
Closed
7-Jun-2023
IPR/ME/2023/05/117/18
Mechanical Engineering
20 weeks
Design of variable aspect ratio charged particle trap
Closed
9-May-2023
IPR/ME/2023/04/113/14
Mechanical Engineering
6 Weeks
Design of micro-mesh filter for Turbine of Indigenous helium plant of IPR
Closed
12-Apr-2023
IPR/ME/2022/12/78/11
Mechanical Engineering
26 Weeks
Mechanical and Electrical Analysis of Dissimilar Material Joints of Cryogenic Components of Superconducting Fusion Magnets
Closed
10-Jan-2023
IPR/ME/2022/12/80/11
Mechanical Engineering
17 Weeks
Experimental investigation for estimation of thermal boundary conditions by using inverse heat transfer techniques
Closed
21-Dec-2022
IPR/ME/2022/09/45/8
Mechanical Engineering
52 Weeks
Design of variable aspect ratio toroidal charged particle trap and Vacuum Vessel
Closed
6-Oct-2022
IPR/ME/2022/08/42/7
Mechanical Engineering
32 Weeks
Design of table-top Hot-wire facility for pebble bed thermal
conductivity measurement
Closed
29-Aug-2022
IPR/MS/2022/05/14/3

42 Weeks
Study of graphite-metal alloy composites
Closed
8-Aug-2022
IPR/ME/2022/06/1/4
Mechanical Engineering
20 Weeks
Design of variable aspect ratio toroidal charged particle trap
Closed
28-Jun-2022
IPR/ME/2022/
06/24/6
Mechanical Engineering
40 weeks
Design of Aerodynamic Bearing and Eddy current Brake for High Pressure Ratio Cryogenic Helium Turbine
Closed
7-Jun-2022
IPR/ME/2022/
06/23/6
Mechanical Engineering
40 weeks
Design of High Pressure Ratio Expander Wheel and Low Temperature Parts for Cryogenic Helium Turbine
Closed
7-Jun-2022
1
Mechanical Engineering
40 weeks
Design of Low-Pressure Phase Separator for the Supply of Liquid Nitrogen
Closed
20-May-2022
2
Mechanical Engineering
40 weeks
Measurement of outgassing rate of the different materials using OGMS
Closed
20-May-2022
3
Mechanical Engineering
40 weeks
Measurement of pumping speed of the noble gas in the closed-refrigeration
cryopump
Closed
20-May-2022

OLD Projects
Note: For OPEN projects, please scroll down the page

Sr. No.
Discipline
Project Duration
Title
(Click on Title to see the Abstract)
Project Status
Date of Upload
1
ME/M. Tech (Metallurgical Engg/Material Science)
1 Year
Sintering and its effect on the bulk density of Li2Tio3 pebbles prepared by freeze granulation method

Closed

2
BE/ B.Tech (Mechanical)
3 Months
Thermo-structural performance analysis of W – Cu Plasma facing components

Closed

3
M.E. / M. Tech. (Metallurgy / Materials Technology) or other relevant branch
1 Year
A Study of Additives Effect on Densification of Magnesium Aluminate Powders Processed by Sol-Gel Technique

Closed

4
M.Tech in (Material Science / Metallurgy / Industrial Metallurgy / Welding Technology / Production / Manufacturing)
1 Year
Development of Activated flux TIG welding of copper pipe using Orbital TIG technique
Closed

5
M.Tech in (Material Science / Metallurgy / Industrial Metallurgy / Welding Technology / Production / Manufacturing)
1 Year
Characterization of dissimilar weld joint of Copper to SS through Inconel transition using Orbital TIG technique
Closed

6
M.E. / M. Tech. (CAD / Design)

1 Year
Mechanical design of former for solenoid and modified triangular shape magnet considering integration with exiting winding machine

Closed

7
M.E. / M. Tech. (CAD / Design)

1 Year
Design and engineering investigations of cryostat housing for low temperature application

Closed

8
M.E. / M. Tech. (Thermal)

1 Year
Design, Analysis and Experimental set up preparation for Hydrogen PPM Measurement

Closed

9
M.E. /M. Tech (CAD/CAM)
08 Months
Development of Robotics Based Maintenance Concepts for In-vessel components using Virtual Reality
Closed

10
M.E./M.Tech (CAD/CAM; Machine Design or Mechatronics)
12 Months
Design and Prototyping of parallel manipulator for Remote Handling (RH) application
Closed

11
M.E./M.Tech (CAD/CAM; Machine Design or Mechatronics)
12 Months
Design of Self-supporting joint for redundant robotic arm
Closed

12
M.E./M.Tech (CAD/CAM; Machine Design or Mechatronics)
12 Months
Multi Body Dynamics of redundant robotic arm with tendon routing
Closed

13
M.E./M.Tech (CAD/CAM; Machine Design or Mechatronics)
12 Months
Design and Prototyping of adaptive gripper for Articulated Remote Handling (RH) Arm
Closed

14
ME (Metallurgy)
12 Months
Influence of substrate bias and temperature on multilayer coatings on AISI 316L stainless steel
Closed

15
M.E. / M. Tech. (CAD / Design)
6 Months
Design of external pressure vessel having rectangular cross-section (2000mm x 2000 mm x 1000 mm) using ASME code
Closed

16
M.E. / M. Tech. (CAD / Design)
6 Months
Design of external pressure vessel having internal diameter 500 mm and length 2000 mm using ASME code.
Closed

17
M.E. / M. Tech. (Thermal / Cryogenic)
10 Months
Study of Pumping Behaviour of Test Cryopumping System
Closed

18
M.E. / M. Tech. (Thermal / Cryogenic)
10 Months
Study of Cryo-pump Exhaust Gas Processing Unit
Closed

19
M.E. / M. Tech. (Thermal / Cryogenic)
10 Months
Study on impact strength of high speed plastic materials
inside the curved guide and its application to solid hydrogen
Closed

20
M.E. / M. Tech. (Thermal / Cryogenic)
10 Months
Design of compact thermal heat switch for low temperature application
Closed

21
M.E./M.Tech (Thermal/ Cryogenic/ CAD-CAM/ Machine design)
10 Months
Design of UHV compatible permeation measurement system
Closed

22
M.E./M.Tech (Thermal/ Cryogenic)
10 Months
Design of activated carbon based refrigeration system
Closed

23
M.E./M.Tech (Thermal/ Cryogenic)
10 Months
Design of cryogenic sorption based industrial air pollution control equipment
Closed

24
M.E./M.Tech (Thermal/ Cryogenic or Similar specialization)
1 Year
Development of a test facility and measurement of performance of 2-stream (He/He) plate-fin heat exchanger
Closed

25
M.E./M.Tech (Thermal/ Cryogenic or Similar specialization)
1 Year
Development of a test facility and measurement of performance of 3-stream (He/He/He) plate-fin heat exchanger
Closed

26
M.E./M.Tech (Thermal/ Cryogenic or Similar specialization)
1 Year
Development of a test facility and measurement of performance of 20 K Helium Purifier
Closed

27
M.E./M.Tech (Thermal / Cryogenic / Chemical)
1 Year
Development of a test facility and measurement of performance of 80 K Helium Purifier
Closed

28
M.E./M.Tech (Thermal / Cryogenic / Physics)
1 Year
CFD analysis for flow mal-distribution in 2-stream (He/He) cryogenic plate-fin heat exchanger
Closed

29
M.E./M.Tech (Thermal / Cryogenic / Physics)
1 Year
Development of a software for design and optimization of counter-flow type cryogenic plate-fin heat exchangers
Closed

30
M.E./M.Tech (Thermal / Cryogenic / Turbomech or Similar specialization)
1 Year
Development of test set-up and performance measurement on adoption of air compressor system for helium gas
Closed

31
BE/ B.Tech (Mechanical)
06 Months
Pressure vessel design as per ASME for high pressure and high temperature application
Closed

32
BE/ B.Tech (Mechanical)
1 Year
Thermal diffusivity measurement of sintered lithium ceramic compacts
Closed

33
M.E./M.Tech (Mechanical)
06 Months
Design and Analysis of ITER XRCS Edge Movement Compensator
Closed

34
BE/ B.Tech (Mechanical)
03 Months
Design and Analysis and related Optimization of Liquid Helium and Liquid Nitrogen Cryogenic Transfer lines
Closed

35
BE/ B.Tech (Mechanical / Metallurgical / Chemical)
06 Months
Thermal Diffusivity measurement of sintered lithium ceramic compacts
Closed

36
M.E./M.Tech (Mechanical/Nuclear)
06 Months
Measurement of Effective Thermal Conductivity of Ceramic breeder pebble bed by Steady State Method
Closed

37
BE/ B.Tech (Mechanical / Metallurgical / Material Science)
06 Months
Heat treatment study of IN-RAFM steel and its effect on Microstructure and Mechanical properties
Closed

38
M.E / M.Tech (Metallurgical Engineering / Materials Science )
1 Year
Study of Plasma Nitriding treatment on aluminized steels
Closed

39
M.E / M.Tech (Metallurgical Engineering / Materials Science )
1 Year
Aluminized coatings on Ti Alloys
Closed

40
BE/ B.Tech (Mechanical)
03 Months
Rigid Body Dynamics of pantograph mechanism
Closed

41
M.E / M.Tech (Metallurgical / Materials Science/Mechanical )
1 Year
Mechanical property investigation of aluminized RAFM steels
Closed

42
M.E / M.Tech (Metallurgical / Materials Science/Mechanical )
1 Year
Experimental study of packed bed thermal diffusivity measurement by laser flash method
Close

43
M.E / M.Tech (Metallurgical / Materials Science/Mechanical )
1 Year
Heat treatment study of IN-RAFM steel to improve its impact properties
Closed

44
M.E. /M. Tech (Thermal/Cryogenic)
10 months
Study of pumping behaviour of different gasses on activated charcoal sorbents
Closed

45
M.E. /M. Tech (Thermal/Cryogenic)
10 months
Development of a low speed solid hydrogen ice ejection system
Closed

46
M.E / M.Tech (Metallurgical / Materials Science/Mechanical )
1 year
Influence of microstructure on Thermo-mechanical fatigue behavior of IN-RAFM steel
Closed

47
M.E / M.Tech (Metallurgical / Production/Mechanical )
1 year
Lithium titanate Pebble preparation by freeze granulation method
Closed

48
M.E / M.Tech (Mechanical )
1 Year
Acoustic effect on plate
Closed

49
BE/ B.Tech (Mechanical / Production)
03 Months
Configuration development of upgradation of Internal bore welding torch
Closed

50
M. E. / M. Tech. (Metallurgical /Materials Science )
1 Year
Study of Additives Effect on Densification of Magnesium Aluminate Powders Processed by Sol-Gel Technique
Closed

51
M. E. / M. Tech. (Metallurgical /Materials Science )
1 Year
To study the effect of interface layer coating on interfacial and mechanical properties of carbon composites
Closed

52
M.E / M.Tech (Mechanical / Thermal)
10 Months
Effect of heat load on pressure drop in two phase flow
Closed

53
ME / M.Tech (Thermal /Cryogenic / Turbo-machinery or similar branch)
10 months
Conversion of open-loop air compressor to closed-loop He compressor and improvement of oil impurity removal from compressed He gas
Closed

54
ME / M.Tech (Thermal /Cryogenic / Turbo-machinery or similar branch)
10 months
Design and Optimization of a regenerator for the prototype cryocooler based on pulse-tube concept
Closed

55
ME / M.Tech (Thermal /Cryogenic / Turbo-machinery or similar branch)
10 months
Development of a layout of piping and valves for cold box of Helium refrigerator plant of cooling power about 1 kW at ~15 K
Closed

56
ME / M.Tech (Thermal /Cryogenic / Turbo-machinery or similar branch)
10 months
Development of a versatile test facility for test of different sizes of plate-fin heat exchangers of He liquefier plant
Closed

57
ME / M.Tech (Thermal /Cryogenic / Turbo-machinery or similar branch)
10 months
Development of a versatile test facility for test of different helium purifiers of He liquefier plant
Closed

58
B.E. / B. Tech (Mechanical)
06 months
Preliminary design and prototyping of a remotely operated in-bore alignment and cutting tool
Closed

59
B.E. / B. Tech (Mechanical)
06 months
Preliminary design and prototyping of a Multi-DOF Parallel Manipulator
Closed

60
B.E. / B. Tech (Mechanical)
06-08 months
Design of a Coaxial DC Break (CDCB) for use in ICRH antenna.
Closed

61
B.E. / B. Tech (Mechanical)
3-6 months
Mechanical Analysis of Fabricated Common Bridge Type Platform Structure and Spiral Ladder of High Pressure Helium Gas Vessels at IPR
Closed

62
B.E./ B.Tech (Mechanical/Mechatronics)
04-06 months
Design of adaptive gripper for Articulated Remote Handling (RH) Arm
Closed

63
B.E./ B.Tech (Mechanical/Mechatronics)
04-06 months
Preliminary Design and Simulation of a Multi-DOF parallel manipulator
Closed

64
B.E./ B.Tech (Mechanical/Mechatronics)
04-06 months
Gravity compensation by mechanism synthesis
Closed

65
B.E./ B.Tech (Mechanical/Mechatronics)
04 months
Topology optimization of serial link manipulator for RH application
Closed

66
B.E./ B.Tech (Mechanical/Mechatronics)
04-06 months
Response Spectrum analysis of mechanical arm in FEAST Software
Closed

67
B.E./ B.Tech (Mechanical/Mechatronics)
04 months
Design and development of a prototype Omnidirectional Robotic platform
Closed

68
B.E./ B.Tech (Mechanical/Mechatronics)
04 months
Development of a prototype Actuation system for the continuum robotic arm
Close

69
BE/ B.Tech (Mechanical / Metallurgical / Material Science)
06 Months
Feasibility study of Sputter Deposited Cu-graphite thin films
Closed

70
M.E / M.Tech (Mechanical)
1 Year
Interaction of gas flow from plasma jet with bio-liquid

Closed

71
ME/M.Tech (Thermal/cryogenic/turbo-machinery or similar branch)
10 Months
Development of a layout of piping and valves for cold box of Helium refrigerator plant of cooling power about 1 kW at ~15 K
Close

72
ME/M.Tech (Thermal/cryogenic/turbo-machinery or similar branch)
10 Months
Analysis and Optimization of Component Process Parameters for Helium Refrigerator of 200 W
Closed

73
ME/M.Tech (Thermal/cryogenic/turbo-machinery or similar branch)
10 Months
Design Of 2-stream (He/2-phase N2) Plate-fin Heat Exchanger and development of a design software
Closed

74
B.Tech (Mechatronics)
06 months
Study of Optical Design and Alignment scheme for ITER CXRS-Pedestal Diagnostic
Closed
21-June-2019
75
B.Tech (Mechatronics)
06 months
Study of ITER CXRS-Pedestal Diagnostic Performance using Designed Hardware, Alignment Scheme and Synthetic Spectra
Closed
21-June-2019
76
B.E (Mechanical / Manufacturing / Production Engineering)
03 months
Design upgradation of the automatic seam tracking system for Laser welded lip seals
Closed
2-July-2019
77
B.E/B.Tech (Mechanical)
06 months
Survey, Selection and Testing of suitable coolant for Magnetic coils of ADITYA-U tokamak
Closed
10-July-2019
78
ME/M.Tech (Thermal/cryogenic/turbo-machinery or similar branch)
10 months
Development of a test facility and performance measurement using different impurities for 80 K helium purifier of helium plants
Closed
10-July-2019
79
ME / M.Tech (Mechanical / Thermal)
1 Year
Design and development of an experimental test facility based on the steady state and radial heat flow methods to measure the effective thermal conductivity of ceramic pebble beds
Closed
19-July-2019
80
ME/M.Tech (Thermal/cryogenic/turbo-machinery or similar branch)
10 Months
Design of Expander Wheel for Aerodynamic Expansion Turbine of Helium Refrigerator/Liquefier Plant
Closed
19-July-2019
81
ME/M.Tech (Thermal/cryogenic/turbo-machinery or similar branch)
10 Months
Design of Bearing for Aerodynamic Expansion Turbine of He Refrigerator/Liquefier Plant
Closed
19-July-2019
82
BE/B.Tech (Design Engineering)
06 Months
Aesthetic Design of Plasma jet
Closed
23-July-2019
83
B.E./ B.Tech (Mechanical/Mechatronics)
3.5 months
Development of Prototype 5-DOF Serial Manipulator
Closed
15-Nov-2019
84
B.E./ B.Tech (Mechanical/Mechatronics)
3.5 months
Design and development of 03-DOF robot for RH application
Closed
15-Nov-2019
85
B.E./ B.Tech (Mechanical/Mechatronics)
3.5 months
Design and prototype development of a Multi-DOF parallel haptic arm
Closed
15-Nov-2019
86
B.E./ B.Tech (Mechanical)
3 Months
Design of Cryogenic adsorber
Closed
16-Dec-2019
87
B.E./ B.Tech (Mechanical)
3-4 Months
Design and optimization of flange with gasket for pressure vessel as per ASME
Closed
13-Jan-2020
88
M.E / M.Tech (Mechanical )
1 Year
Open
30-July-2021
89
M.E / M.Tech (Thermal / Cryogenic
Engg.)
8  Months
Open
12-Oct-2021